Skip to main content
Delacco
+385 91 25 50 100 prodaja@delacco.hr
Quote request Contact EN EN
GIS Handy Telescope GPHT500 Hoist
Back to catalog

GIS GPHT 500 Handy Telescope Electric Chain Hoist 250 kg

SKU root: GIS-GPHT | Market: EN | Locale: en
Price Configure your crane below — live price, weight and shipping update as you choose.
Categories: Electric Chain Hoists
Volume pricing — save up to 12% Discount is calculated automatically on the cart subtotal.
QuantityDiscount
1 unit —
2 −3%
3–4 −5%
5–9 −8%
10+ −12%

+3% bundle promo when this order combines items from at least two product categories (e.g. a hoist + a jib crane). Combined with volume pricing, total savings can reach 15%.

Configure your crane

Select capacity, span and options. Price, weight and shipping update live.

Step 0 — required

How will you use this hoist?

Pick the closest match. Each duty class has its own capacity envelope: the heavier the use, the lower the rated weight. Selecting a class lighter than your real-world use voids the manufacturer warranty and risks motor failure. If unsure, pick the highest expected class — the hoist you actually need.

1 Lifting capacity — kg
2 Lift height (telescope) — m
3 Power supply

The GPHT 500 is built for 3-phase mains only — 3 × 400 V is the workshop standard. 1-phase versions are not catalogued.

4 Lifting speed

Two-speed NF (8/2 m/min) is the standard — the slow stage gives precise positioning. SF doubles the speed to 16/4 m/min. The FU versions are frequency-controlled with a soft start: N FU 2.4–9.6 m/min or slow NL FU 1.2–6.9 m/min — recommended for delicate eccentric loads.

5 Load attachment

The Handy load suspension devices mount at the handle for quick fastening of loads. The angle suspension attachment carries eccentric special constructions (max. 150 Nm); the threaded-bolt connector M12 accepts custom load suspension devices.

6 Slack chain detector

Stops the hoist if the chain goes slack (load set down or support failure) — recommended when the telescope pushes loads into fixtures.

7 Thermal protection

Klixon thermostat protects the hoist motor from overheating under heavy hand-guided cycling (GP 250/500 frame).

8 Operating data counter

Records operating hours, cycles and overloads for maintenance planning (GP 250/500 frame).

Request quote

Share your project details and we will get back with a tailored quote.

The GIS GPHT 500 handy telescope model pairs the Handy one-hand control concept with a rigid telescope guidance: the load chain runs on the inside of the telescope tube, so eccentric loads and special load suspension constructions (up to a torque of 150 Nm) can be lifted without the load rotating or swinging. The control handle sits directly on the load thread — the operator guides the transport good and drives the hoist with a single hand.

Key features

  • Rigid telescope guidance — suspension of eccentric loads up to a max. torque of 150 Nm; the lifting process takes place through the chain on the inside of the telescope tube
  • Control handle fixed at the chain end — the operator guides the load and controls lifting with ONE hand; no pendant or control cable needed
  • Suitable for left- and right-handed people; the control coil always returns to the starting position
  • Based on the GP 500: up to 250 kg @ A5/M5, catalogued up to duty class A7/M7 (3-shift, 160 kg)
  • Three fixed lifting heights: 1200 mm, 1500 mm and 2000 mm (rigid telescope lengths)
  • Speed profiles: two-speed NF 8/2 m/min (default), fast SF 16/4 m/min, or frequency-controlled soft-start FU versions N (2.4–9.6 m/min) and NL (1.2–6.9 m/min)
  • Quick fastening of loads: fixed load hook, rotatable load hook, threaded-bolt connector M12 or the angle suspension attachment for eccentric load suspension devices
  • Optional slack chain detector stops the hoist if the chain goes slack
  • Protection class IP65, insulation class F, load hook DIN 15401; 3-phase mains (3 × 400 V / 3 × 230 V)
  • Complies with the Machinery Directive 2006/42/EC

Technical overview

  • Model / SKU: GIS-GPHT (GPHT 500)
  • Product family: Electric Chain Hoists
  • Load capacity: 250 kg @ M5 (200 kg @ M6, 160 kg @ M7)
  • Lift height: 1.2 / 1.5 / 2.0 m, fixed by the telescope length
  • Max. eccentric moment: 150 Nm
  • Lifting speed: 8/2 m/min (NF), 16/4 m/min (SF) or FU soft start 2.4–9.6 / 1.2–6.9 m/min
  • Duty class: A5/M5 – A7/M7
  • Power supply: 3 × 400 V / 3 × 230 V, 50 Hz
  • Protection class: IP65
  • Dead weight: 52 kg (NF/SF) / 53 kg (FU), 1.5 m lift
  • Typical use: workstation handling of eccentric or guided loads — engine blocks, moulds, fixtures, workpieces that must not rotate or swing

Configure capacity, telescope lifting height, duty class, speed profile and load attachment online, then add the hoist to the cart or quote list. Every configuration is priced from the current GIS factory price list.

Related products

GIS GPHT 500 Handy Telescope Electric Chain Hoist 250 kg From 5.187,30 EUR
Back to top Request quote